Shed Fabrication in Vadodara, Gujarat
Industrial and factory shed fabrication — clear-span working floors with crane provision, ventilation and natural light designed in.
What Shed Fabrication Means at Matrix PEB
A shed is judged by how well it lets you work inside it. Column-free floor area, enough height for material handling, air movement that keeps the space usable in a Gujarat summer, and daylight that reduces the lighting bill — those are the specifications that matter, and they are set at the design stage, not chosen later.
We fabricate factory sheds, workshop sheds, assembly and production sheds, storage sheds and covered yard structures. Spans are engineered to your layout rather than snapped to a standard grid, so machine lines and gangways fall where you want them.
Where an EOT or gantry crane is involved, the crane defines the structure. Column sections, gantry girders, bracing and eave height are all worked back from the crane's capacity, duty class and hook height.
What’s Included
Clear-span framing
Column-free spans engineered to your production layout, with bay spacing set for the loads and the column positions you can live with.
EOT crane provision
Gantry girders, crane brackets and longitudinal bracing designed for the stated capacity and duty class, with deflection kept inside limits.
Ventilation systems
Ridge ventilators, turbo ventilators and louvres sized for the heat load — essential for foundries, processing units and any hot process.
Natural lighting
Polycarbonate skylight sheets in roof and wall, positioned to cut daytime lighting load without creating hot spots on the floor.
Insulation options
Glass wool, PUF or air-bubble insulation under the roof sheet where the interior temperature needs controlling.
Doors, gates & openings
Sliding gates, rolling shutters, personnel doors and ventilation openings framed into the structure rather than cut into it later.
Shed Fabrication Across Gujarat & Madhya Pradesh
We deliver shed fabrication from our Vadodara works to industrial estates across the region. Pick your city to see how we work there.
Shed Fabrication — Frequently Asked Questions
What does a fabricated shed cost per square foot?
Cost depends on span, eave height, crane provision, sheeting specification and site location, so a per-square-foot figure quoted without those is meaningless. Send us the span, height and intended use and we will give you a specific budget figure — usually within a day or two.
What is the maximum clear span you can build?
Clear spans of 30–40 m are routine with a single gable frame, and larger spans are achievable with a multi-span or truss arrangement. Beyond a point the economics change, so we usually present two options — one with an intermediate column line and one without — and let you compare the cost.
Can you extend an existing shed?
Yes, and it is a common request. We survey the existing structure, check whether the end frame can take the extension loads, and design the new bays to tie in. Occasionally the existing frame needs strengthening first — we will tell you if so before quoting.
How long does a shed last?
With a properly specified coating system and basic maintenance, a steel shed structure has a service life measured in decades. Sheeting is normally the first element to need attention; the framing outlasts it comfortably when the paint system was chosen for the actual site exposure.
Planning a steel building project?
Tell us about your requirement and our team will get back to you with expert guidance and a competitive quote.